Philips 10000241 - Manuel (Page 8)

5
1 2 3
4
7
6 5
INSTALLATION
Attach the female end of the power
cord to the machine. Insert the
male end into the power outlet
(see data tag).
Place a container beneath the hot
water spout.
Remove the coffee bean lid.
Fill the hopper with coffee beans.
Close the lid pushing it down
completely.
Remove the water tank.
Install the water fi lter as
recommended on page 7.
Press the main power button to the
“ON” position.
Make sure that the main power button is not pressed in the “ON” position.
Fill the tank with fresh drinking
water. Do not exceed the “max”
level indicated on the water tank.
Once fi lled, place the tank back
into the machine.
STARTING THE MACHINE
The machine automatically primes the water circuit.
The machine is now ready for use.
Water may not be dispensed into the container.
This should not be considered a malfunction.