Philips 10000241 - Manuel (Page 27)

24
16
2 3
5 6
1
4
Turn the knob until it is in the rest
position ( ).
MAINTENANCE
Check the quantity of water contained in the tank and,
if desired, install the water fi lter again or re-insert the
small white fi lter (see page 7).
When descaling is complete, return to the main menu
to brew beverages.
Group washing
> maintenance > group wash
This function is used to clean the machine’s internal circuits used for brewing coffee.
To wash the Brew Group, simply clean with water as shown on page 26. This wash completes the
maintenance process of the Brew Group. We recommend performing this cycle on a monthly basis (or
every 500 coffees), using the Saeco tablets, which can be purchased separately.
Note: before performing this function make sure that:
1. a large enough container is positioned under the spout;
2. the appropriate tablet for cleaning the Brew Group has been inserted into the
compartment for pre-ground coffee;
3. the water tank contains a suffi cient quantity of water.
THE WASH CYCLE CANNOT BE INTERRUPTED.
A PERSON MUST BE PRESENT DURING THE OPERATION.
Insert the cleaning tablet as shown
above.
Press to start.
Wait for the cycle to begin.
The Brew Group has been washed. To
exit the programming mode, press the
MENU button (see page 18).
Please refer to page 20 to access
the “group wash” menu.
Press the button to confi rm.
You can check the status of the
cleaning cycle on the display.
3.3.1 group wash
execute now
insert tablet
and press ok
group wash
please wait
passage
[2/3]
wash completed
please wait
3 maintenance