Philips 10000241 - Manuel (Page 20)

17
1 2 3
4 5
6 7 8
9 10
Check that the water tank and coffee
bean hopper are full; place the cup
under the dispensing head.
Press the button.
Press the button a few times
to adjust the quantity of coffee to be
ground or select the use of pre-
ground coffee. Press the
button to save.
Select the beverage to program.
Press the button to confi rm.
Select “bev. settings”. Press the
button to confi rm.
Change the coffee quantity by
navigating the click wheel with your
fi nger; confi rm with .
Press the button for more
than two seconds to access the
other programmable settings.
Change the temperature setting
(high, medium, low) by navigating
the click wheel with your fi nger.
Press the button to save.
Press the button to select the
prebrew setting.
Change the prebrew value (normal, long,
off) by turning the click wheel with your
fi nger. Press the button to save.
Press the button to exit.
strong aroma
espresso
1 bev. settings
1.1 espresso medium aroma
espresso
espresso
temp.: medium
espresso
prebrew: normal
espresso
temp.: medium
espresso
prebrew: normal
espresso
Prebrewing: the grounds are
slightly dampened before
brewing to bring out the full
aroma of the coffee and
enhance the fl avor.
When the settings are
changed, the message on the
display starts fl ashing.
When the changes are saved
the message stops fl ashing.
1.
1.
2.
1.
2.
2.
2. 2.
2.
1.
1.
1.