Philips 10001257 - Manuel (Page 45)

42
12
6 5 4
Insert the washed and dried brew
group. DO NOT PRESS THE
"PUSH" BUTTON. Close the service door and insert
the coffee dregdrawer.
After approximately 2000 grinding cycles, the grinder needs a slight adjustment to ensure it is running in
peak condition.
WARNING!
This operation should be carried out carefully and by an experienced user. The screw could fall into the
grinder; if this happens, remove it before restarting the machine. Protect the grinder hole with a cloth to
avoid this problem.
The snap is signalled by a message on the coffee bean hopper; refer to these messages when this
adjustment is performed.
EMPT Y THE COFFEE BEAN HOPPER.
GRINDER MAINTENANCE
Adjust until it clicks. Remove screws and grinder door. Unscrew the screw that holds the
grinder door closed.
Then reposition the grinder door and attach it with the previously removed screw.
Apply the grease evenly.
10 11
Once the cycle has ended, turn
off the machine and unplug it. Press and dispense two coffees. When the above screen appears,
press
just once.
3 1
strong aroma
espresso coffee 08:33
2
out of coffee
espresso coffee 08:33
CLEANING AND MAINTENANCE