Philips 10001257 - Manuel (Page 16)

13
1 2 3
4 5 6
If the user wishes to continue preparing other drinks the
machine will keep the “rinsing milk circuit” signal
active.
After 20 minutes of inactivity, the machine requires the user to
perform a rinsing cycle as described in step 7. If the machine is
turned off immediately after dispensing a milk beverage, the
next time the machine is turned on it will require the user to
perform a rinsing cycle.
Note: Before performing the “milk rinsing circuit” function
make sure that:
1. a large enough container is positioned under the
dispensing head;
2. the water tank contains a suffi cient quantity of water.
After 14 days from the fi rst dispensing of
a milk-based beverage, the message
“milk circuit washing” is displayed; it is
advisable to clean the milk circuits as
shown on page 26.
After another 7 days the machine stops
dispensing milk-based beverage and the
milk circuits must be washed; during this
phase, coffee and hot water may be
dispensed.
milk circuit washing
espresso coffee 08:33
After this, the machine allows you to
dispense more milk if you wish.
This option remains active for approx.
3 seconds. To activate it, press the
button. Once the desired
quantity has been reached, press the
button again to stop dispensing.
LATTE MACCHIATO Fill the milk container
strong aroma
espresso coffee 08:33
Press the button.
strong aroma
latte macchiato 08:33
Select latte macchiato by navigating
the click wheel with your fi nger.
strong aroma
latte macchiato 08:33
Select the aroma by pressing the
button one or more times.
brewing in progress
latte macchiato
Press the button once for 1
cup and twice for 2 cups. The
latte macchiato will be brewed.
add milk?
latte macchiato
The machine will propose cleaning
the milk circuits.
Press the
button to clean the
internal circuits.
rinsing milk circuit
latte macchiato 08:33
SEE INSTRUCTIONS ON PAGE 39-40 FOR OPTIMAL MILK DISPENSING.
WARNING! DO NOT OPEN THE SERVICE DOOR DURING THE BREWING, DISPENSING,
WASHING OR RINSE CYCLE.