Philips 10001257 - Manuel (Page 20)

17
select the quantity of coffee to be ground (opti-dose),
or select pre-ground coffee,
and/or set:
- coffee temperature
- coffee prebrewing
navigate the click wheel with your
fi nger to select:
- the quantity of coffee to be brewed;
- the quantity of milk to be dispensed;
- the coffee temperature;
- the coffee prebrewing.
restore factory settings.
select coffee or milk to
change the quantity per
cup.
save the new settings.
1. MANUAL PROGRAMMING
Each beverage can be programmed according to your individual taste.
The following page describes how to program a beverage containing milk and coffee; the programmable settings for
each beverage may differ according to the type of beverage.
For all beverages you can quickly program the quantity of coffee and/or milk dispensed in the cups whenever
the brew button is pressed.
Select the type of beverage you want to program, then press and hold the
button until the display
shows (for example): self-instruction active
espresso coffee
The machine dispenses coffee or milk.
When the desired amount is reached, press the
button again.
The display will show:
(Only beverages with coffee and milk): for beverages with coffee and milk, you need to save the desired
quantity of both milk and coffee by pressing the
button. This adjustment must be performed during the
relevant dispensing phase in the normal beverage dispensing process.
The dispensed quantity of coffee and/or milk remains stored and replaces any previous settings.
new quantity saved
espresso coffee
2. PROGRAMMING FROM THE “BEVERAGE SETTINGS” MENU
To adjust the settings for preparing beverages: press the button and select “beverage
settings” by navigating the click wheel with your fi nger.
In this phase you can:
exit the programming
mode.
beverage settings
BEVERAGE PROGRAMMING