Philips 10001257 - Manuel (Page 25)

22
1
1 2 3
3 4 5
2
1 2 3 4
A B C
Intenza Aroma System
Machine water hardness setting
Check the water hardness level obtained from the test.
The measurement can be used to set the Intenza Aroma
System correctly (see page 7). Matching parameters are
described on the upper part.
Immerse the water hardness test
strip (included in the accessories)
for one second in water.
The test strip can be used
only for one measurement.
RINSE CYCLE
machine settings machine settings
rinse cycle
Note: This rinse cycle is performed every time the machine is turned on after the warming phase.
> machine settings > rinse cycle.
To clean the internal circuits in order to guarantee that the beverages are dispensed only with fresh water.
This function is activated by default by the manufacturer.
Select by navigating the click
wheel with your fi nger.
It is possible to set:
- yes
- no
WATER HARDNESS MENU - INTENZA AROMA SYSTEM
> machine settings > water hardness.
To adjust your machine and the Intenza water fi lter to the level of hardness of the water you use, so that the
machine will request descaling at the right moment.
The water hardness in the Intenza water fi lter is expressed on a scale from A to C.
The water hardness in the machine is expressed on a scale from 1 to 4.
machine settings machine settings
water hardness
- 3 +
water hardness
Set and store the water hardness
according to the value on the test strip.
Press the button to save.
PROGRAMMING THE MACHINE
1.
2.
1.
2.
1.
2.
1.
2.
1.
2.