Philips 10001257 - Manuel (Page 27)

24
1 2 3
4 5
MAINTENANCE MENU
machine settings
maintenance
maintenance
milk circ. rinse cycle
> machine settings > maintenance.
To clean all the machine’s internal circuits used for making coffee and milk. Navigate the click wheel with
your fi nger to:
maintenance
milk circ. rinse cycle
maintenance
milk cleaning cycle
rinse the milk circuits after making
the beverages.
thoroughly clean the milk circuits. This
must be performed after a fi xed time
has elapsed from the fi rst dispensing.
maintenance
coffee cleaning cycle
maintenance
descaling cycle
clean the brew group.
Perform the descaling cycle.
Milk circuit rinse cycle
> machine settings > maintenance > milk circ. rinse cycle
WARNING! DO NOT OPEN THE SERVICE DOOR DURING THE BREWING, DISPENSING,
WASHING OR RINSE CYCLE.
To rinse the machine’s internal circuits used for preparing milk.
This short cycle must be performed after 20 minutes from the last dispensing of a beverage with milk. If it is
not performed, the machine comes to a halt and does not allow the dispensing of milk beverages.
Note: Before performing this function make sure that:
1. a large enough container is positioned under the spout;
2. the milk container has been correctly inserted in the machine;
3. the water tank contains a suffi cient quantity of water.
yes
milk circ. rinse cycle
in progress
milk circ. rinse cycle
Remove the container, rinse and dry. Wait for the cycle to complete.
AFTER USE, ALWAYS REMOVE
THE MILK CONTAINER AND PUT IT
IN THE REFRIGERATOR.
The container may be left in
the machine only if it has
been washed with drinking
water and it does not contain
milk; see page 39.
PROGRAMMING THE MACHINE
1.
2.
1.
2.
1.
2.