Philips 10001257 - Manuel (Page 10)

7
5 4
1 3 2
Remove the small white fi lter
from the tank and store it in a dry
place sheltered from dust.
Fill the tank with fresh drinking
water and reinsert it into the
machine.
Set the Intenza Aroma System:
A = Light water
B = Medium water (standard)
C = Hard water
For further details see page 22.
INTENZA WATER FILTER
To improve the quality of the water you use, and extend the life of your machine at the same time, it is
recommended that you install the water fi lter. After installation, go to the water fi lter menu to initialize (see
programming). By activating the water fi lter, the machine informs the user when the water fi lter must be
replaced.
Remove the water fi lter from its packaging, immerse it vertically (with the opening facing upwards)
in cold water and gently press its sides so as to let the air bubbles out.
Insert the fi lter in the empty tank.
The reference mark and the
groove must match. Push fi rmly
until it is completely inserted.
NOTE: If the Intenza water fi lter is not available, insert the small white fi lter previously removed (see point 1)
into the tank.
Place a container beneath the
hot water spout.
6
Please refer to the fi lter
initialization as described
on page 21.