Philips 10001257 - Manuel (Page 33)

30
1 2 3
4 5 6
7 8 9
In order to run a descaling cycle before the machine indicates the necessity to do so:
machine settings
maintenance
maintenance
descaling cycle
yes
descaling cycle
descaling
descaling cycle
fill water tank
descaling cycle
insert tank
descaling cycle
Insert the descaling solution
and press the
button to
begin.
The machine begins to
dispense the descaling solution
through the hot water spout.
The dispensing occurs at
preestablished intervals, in
order to allow the solution to be
more effective.
When the cycle is fi nished the
following message appears on
the display:
Remove the water tank, rinse
with fresh drinking water to
eliminate traces of descaling
solution, then refi ll with fresh
drinking water. Insert the tank back on onto the
machine.
rinse cycle
descaling cycle
rinsing
descaling cycle
done
descaling cycle
Rinse the machine's circuits by
pressing the
button.
The machine performs the rinse
cycle. During the rinse cycle, the
machine may require the water
tank to be fi lled. Press the button and exit the
programming by pressing the
button. Check the quantity of water
contained in the tank and, if desired,
install the water fi lter or reinsert the
small white fi lter (see page 7).
PROGRAMMING THE MACHINE
When descaling is complete, perform a cleaning and maintenance cycle on the milk container as described on page 39-40.
1.
2.
1.
2.
1.
2.