Breville the YouBrew Glass BDC550XL - Manuel (Page 9)

16 17
USInG tHE yoUBREw ® GLASS - SInGLE CUP MoDE USInG tHE yoUBREw ® GLASS - CARAFE MoDE
b) ‘BREWING’ as the coffee is dispensed
into the carafe.
To stop the cycle at any time, press the
START | CANCEL button. You will hear
a winding sound. This is normal.
CAUTION
Never open the swing-out door and
remove the coffee basket while brewing.
Hot water and coffee can cause injury.
6. Using the Brew Pause Feature
The Brew Pause feature temporarily
ceases the flow of coffee when the carafe is
removed so a cup can be poured mid-brew.
Do not remove the carafe for longer than
20 seconds or the coffee may overflow the
coffee basket.
7. Empty the Coffee Basket
Once the brewing cycle is complete, the
ready signal will sound and a winding sound
will be heard. This is normal. The coffee
machine will automatically shut-off, however
the LCD screen will flash ‘EMPTY COFFEE
FILTER’ as a reminder to remove the coffee
basket and discard the used grinds. Wash
the coffee basket, taking particular care to
rinse the chute area. Then dry the coffee
basket and chute area thoroughly.
We also recommend checking the coffee
grinds chute disc for any build-up of coffee
grinds. This is the stainless steel disc that is
visible when the swing-out door is opened.
A build-up of grinds on this disc can affect
the performance of the machine. Wipe the
disc clean then dry thoroughly.
CAUTION
The coffee basket and gold tone or
paper filter may still be very hot after
brewing. Use caution and allow to cool
before removing.
8. warming Plate
The warming plate will automatically
turn on during the brewing process. It
will remain on for 2 hours after brewing
is complete then automatically turn off.
Alternatively, the warming plate can be
turned off before 2 hours by pressing the
START | CANCEL button. The LCD screen
will display 'WARMING PLATE ON' while
the warming plate is on. Use caution as the
warming plate will be hot.
CAUTION
Warming plate is hot.
CAUTION
Hot steam may rise when pouring.
The bottom of the carafe is hot to touch
for several minutes after brewing. Use
caution. Do not set the carafe on a heat
sensitive surface.
USInG tHE yoUBREw ® GLASS
- SInGLE CUP MoDE
First time Use only
We recommend flushing the machine to
remove any dust particles or residues from
the manufacturing process. Follow the
instructions, ‘Using the YouBrew
® Glass -
Carafe Mode’, ensuring to completely fill the
water tank (Step 1) and select the
‘PRE-GROUND’ coffee setting (Step 4).
However do not add any coffee to the
coffee basket. Once the cycle is complete,
discard the water from the carafe and repeat
the cycle again for best results. The machine
is now ready to use.
CAUTION
We recommend using cold, filtered
water. We do not recommend the use of
de-mineralized or distilled water as this
may affect the taste of brewed coffee
and how the coffee machine is designed
to function.
1. Fill the water tank
Press to open the flip top-lid. Pour the
desired amount of cold, preferably filtered
water into the tank using a jug or the
provided carafe. The LCD screen will
indicate the amount of water in the tank as
it is filled. The machine will beep when full
and the water level float will rise to indicate
the maximum level. Do not exceed the 12
cup maximum. Doing so may cause water
spillage at the back of the machine. Close
the flip-top lid.
notE
Check the water level on the LCD
screen before use. The water tank
should be refilled with cold, preferably
filtered water. Do not fill with any
other liquid.
notE
Never pour water into the bean
hopper or grinding chamber area.
Doing so can cause the grinder to
clog. Only re-commence use when
the grinding chamber and grinding
burrs are completely dry. Refer to
Troubleshooting, ‘Moisture clogging
grinder’, page 29.
notE
Never fill the water tank once the
coffee machine has started a brewing
cycle. This will affect the volume
dispensed into the cup.
2. Pre-warm the Cup or travel Mug
A warm cup will help maintain the coffee’s
optimal temperature and keep coffee hotter
for longer. Fill the cup with hot water for about
30 seconds then discard the water. Place
the cup into position under the drip stop
outlet, either on the drip tray or in the drip
tray cavity (see tip below). Ensure no parts of
the cup come into contact with the warming
plate. The warming plate will be hot during
brewing and for approximately 5 minutes
after brewing and can damage non-heat
resistant cups and travel mugs that are in
direct contact.
WARMING PLATE
CAN DAMAGE
NON-HEAT
RESISTANT CUPS.
DRIP TRAY
CAVITY
tIP
For taller cups and travel mugs,
remove the drip tray at the base of
the machine. Press the OPEN button
to open the swing-out door. Insert
the cup/mug into the drip tray cavity
before closing the swing-out door. The
maximum cup/mug dimensions are
7.5" height, 2¾" diameter.
REMOVE DRIP TRAY, OPEN DOOR,
INSERT CUP, CLOSE DOOR.