High low mute – Breville the YouBrew Glass BDC550XL Manuel d'utilisation
Page 11
20
21
CHAnGInG tHE ‘READy’ SIGnAL voLUME
PRoGRAMMInG tHE CLoCK / AUto-StARt (oPtIonAL)
PRoGRAMMInG tHE CLoCK
(oPtIonAL)
You must set the clock to use the Auto-Start
feature. Always remember to reset the clock
for time changes, power outages and when
you unplug the machine.
1.
Press the PROGRAM button until the
LCD screen displays ‘TIME NOW’.
Once this appears, press and hold the
PROGRAM button until the PROGRAM
button illuminates red and the LCD
screen displays a flashing ‘AM’.
2.
Use the
and
buttons to select
either AM or PM.
3.
Press the PROGRAM button. The
LCD screen will display a flashing
hour.
4.
Use the
and
buttons to select
the desired hour.
5.
Press the PROGRAM button. The
LCD screen will display a flashing
minute.
6.
Use the
and
buttons to select
the desired minute.
tIP
For faster scrolling, press and hold the
and
buttons.
7.
Press the PROGRAM button to
finish. The LCD screen will display
‘TIME NOW’ and the programmed time.
PROGRAM
SET CLOCK
PRoGRAMMInG AUto-StARt
(oPtIonAL)
The Auto-Start feature allows you to
program the specific time when the coffee
machine will automatically turn on and start
the preheating and grinding cycle.
1.
Ensure the clock is set.
2.
Press the PROGRAM button until
the LCD screen displays ‘START AT’.
Once this appears, press and hold
the PROGRAM button until the LCD
screen displays a flashing ‘AM’ or
'PM'.
3.
Use the
and
buttons to select
either AM or PM.
4.
Press the PROGRAM button.
The LCD screen will display a
flashing hour.
5.
Use the
and
buttons to select
the desired hour.
6.
Press the PROGRAM button.
The LCD screen will display a
flashing minute.
7.
Use the
and
buttons to select
the desired minute.
tIP
For faster scrolling, press and hold the
and
buttons.
8.
Press the PROGRAM button. It
will illuminate red and the LCD
screen will display the programmed
‘START AT’ time for 5 seconds.
During this time, press the
START | CANCEL button. The
LCD screen will dim and display
‘PROGRAM ON’ to indicate
that the Auto-Start feature has
been successfully turned on. If
‘PROGRAM ON’ does not appear,
then the Auto-Start feature has not
be activated.
notE
During Step 8, the programmed
'START AT' time will appear on the
LCD screen for 5 seconds. If the
START | CANCEL button is not
pressed within 5 seconds, 'TIME
NOW' will appear on the LCD screen
and pressing the START | CANCEL
button will cause the coffee machine
to start grinding and brewing.
START
CANCEL
9.
Ensure that the coffee machine
is correctly assembled and
prepared with:
•
Sufficient water in the water tank and
coffee beans in the bean hopper.
•
The coffee basket assembled with
an empty gold tone filter or paper
filter (8-12 cup, flat base basket style
with ~ 3¼"/8.25cm base).
•
Either a cup, travel mug or carafe
positioned under the drip stop outlet.
notE
To cancel a programmed Auto-Start,
press the START | CANCEL button
until the LCD screen no longer
displays ‘PROGRAM ON’.
notE
The Auto-Start feature must be
selected each time you want to
pre-schedule a brew. Press the
PROGRAM button until the LCD
screen displays ‘START AT’. The
coffee machine will remember the
last programmed Auto-Start time, so
simply press the START | CANCEL
button to re-select. Ensure
‘PROGRAM ON’ is displayed on the
LCD screen.
notE
Always remember to reset the clock
and Auto-Start time when there is a
time change, power outage or after
you unplug the machine.
CHAnGInG tHE ‘READy’
SIGnAL voLUME
The volume of the ‘Ready’ signal can
be changed to suit your preference.
There are 3 options:
HIGH
LOW
MUTE
Press and hold the STRENGTH | FLAVOR
button until the LCD screen flashes one of
the sound icons pictured above. While the
icon flashes, use the
or
button to
select the desired volume. The volume is
selected once the icon stops flashing.
The selected volume will remain displayed
on the LCD screen.