Breville BBL420XL - Manuel (Page 13)

12
OPERATING yOUR BREvILLE HEMISPHERE™ MINI
Select the required speed (1 to 12)
by turning the dial to the
corresponding speed.
Operate the blender only for the
appropriate amount of time required –
do not over blend.
5. PULSE/ICE CRUSH button - For
ingredients that require short bursts
of power, like crushing ice. The
PULSE feature can be used while the
blender is in the ‘STAND BY’ position.
When pressed, the PULSE button will
continue to operate until it is released.
The PULSE button LED will flash red
until PULSE button is pressed and will
flash again once released.
NOTE
The maximum amount of ice cubes
the blender can blend at any one time
is 1 standard ice tray or 250g.
NOTE
Use the PULSE button when the
food that is being processed is too
thick or coarse to circulate within the
blender jug.
6. At the end of use, always ensure the
blender is turned to the ‘OFF’ position and
unplug the cord. Ensure the motor and
blades have completely stopped before
attempting to move the appliance, or
when the blender is not in use and before
disassembling, cleaning and storing.
NOTE
Your blender features a motor overload
protection feature and warning LED.
If the motor overloads the “overload
protection” LED will illuminate. To
reset remove Jug from blender, turn to
OFF position, unplug from the power
outlet and let the Blender rest for 30
minutes to allow the motor enough
time to cool and the fuse protector to
reset.
NOTE
The Blender must be unplugged from
the power outlet for the overload
protection fuse to reset.
NOTE
During the blending process,
ingredients may stick to the side of the
blender jug. To push the food back onto
the blades, turn the blender to the ‘OFF’
position, and remove the power cord.
Remove the lid and use a plastic spatula
to scrape down the sides of the jug.
Replace the lid before recommencing
blending.
NOTE
If any moisture or liquid appears on
top of the motor base during blending,
turn the blender to the ‘OFF’ position
and remove the power plug. Remove
the blender jug. Wipe the motor base
immediately with a dry cloth or paper
towel to absorb the liquid. Check the
blade assembly is tight.
WARNING
Never place anything other than food
and liquids in the blender while the
motor is running.
WARNING
Be careful when handling the blending
blades as they are sharp. Mishandling
of the blades may cause injury.
BBL420XL_IB_C11_FA.indd 12 19/08/11 1:35 PM