Napoleon Fireplaces GSS48ST - Manuel (Page 16)

www.napoleongrills.com
16
EN
Conversion to LP (Propane) Gas
WARNING!
To avoid the possibility of burns conversions should only be done when the appliance
is cool. Ensure the burner is turned off. Turn the gas off at source and disconnect the appliance before
beginning conversion.
WARNING!
Glass embers may have sharp edges wear safety glasses and gloves when handling.
WARNING!
This conversion must be performed by a licensed gas fitter, and all connections must
be leak tested before operating the appliance.
Your fireplace can be easily converted to LP (Propane) Gas by following these steps:
1. Remove the glass embers from the tray.
2. Remove the glass tray from the fireplace by removing the (8) screws that hold the tray in place.
3. Carefully lift the glass tray from the fireplace and set aside. Take care not to damage or kink the
thermocouple wire.
4. Disconnect the stainless steel flex connector from the orifice using (2) wrenches.
5. Unscrew the natural gas orifice from the inside of the burner as illustrated.
6. Replace the natural gas orifice with the LP (Propane) orifice supplied.
Note: The air shutter has been factory set and does not need to be adjusted.