Napoleon Fireplaces High Country 6000 - NZ6000 Manuel d'utilisation

Page 31

Advertising
background image

W415-0594 / E / 10.19.12

31

AVERTISSEMENT

:

AIR COMBURANT

SEULEMENT

W

ARNING:

COMBUSTION

AIR

ONL

Y

W

ARNING:

BLOWER

CONNECTION ONL

Y

AVERTISSEMENT

:

CONNEXION DE LA

SOUFFLERIE
SEULEMENT

JUNCTION

BOX COVER

UNIT

JUNCTION

BOX

AVERTISSEMENT

:

AIR COMBURANT

SEULEMENT

W

ARNING:

COMBUSTION AIR

ONL

Y

W

ARNING:

BLOWER

CONNECTION ONL

Y

AVERTISSEMENT

:

CONNEXION DE LA

SOUFFLERIE
SEULEMENT

C.

Connect the 6” collar to the blower opening located on the side of the appliance. An optional opening is
covered on the other side of the appliance. If this location is preferred, switch the cover plate and col-
lar.

Secure by reaching through the collar and bending the tabs.

Use sealant to ensure that the connection is air tight.

We recommend installing the blower in a different room or
even different level of the house. This will generate greater air
movement and improve the distribution of the warm air com-
ing from the appliance.

D. Electrical

Connection

a) Remove the junction box covers on the

appliance and the blower.

b) Removing the junction box cover on the

appliance exposes 4 black, labeled wires:

Two wires labelled "by-pass" - go to by-pass
(summer) switch (not supplied - overrides the
thermally activated switch enabling the user to
run the blower without heat).

IMPORTANT: Marrett by-pass (summer)
switch wire leads separately (do not connect
together), if the by-pass switch is not
desired.

One wire labelled "blower" - connects to
KB-35 rheostat (not supplied) and then fan-
speed control blower wire connects to white
blower wire.

One wire labelled "L1" - connects to power
(hot lead).

c) Removing the junction box cover on the

blower exposes 3 coloured wires:

One black wire - connects to power "L2"
(neutral lead).

One green wire - connects to ground.

One white wire - connects to fan-speed control
rheostat (not supplied) See above.

FAN

L2

L1

THERMODISC

G

FAN-SPEED CONTROL

(RHEOSTAT {VARIABLE SPEED SWITCH})

or WALL SWITCH or THERMOSTAT

NOT SUPPLIED

BY-PASS

(SUMMER)

SWITCH

NOT SUPPLIED

PRESSURE

SWITCH

L2 [ NEUTRAL ]

BLACK

L1 [ HOT ]

GROUND

GREEN

BLOWER

KB35

RHEOSTAT

not supplied

SUMMER

SWITCH

2 BY-PASS WIRES

WHITE

Advertising