Napoleon Fireplaces High Country 6000 - NZ6000 - Manuel (Page 25)

W415-0594 / E / 10.19.12
25
USE ONLY A NON-COMBUSTIBLE MATERIAL TO FINISH THE FACE OF THE APPLIANCE. A NON-COM-
BUSTIBLE MATERIAL SUCH AS CEMENT BOARD IS REQUIRED FOR THIS PURPOSE.
VENTILATION OPENINGS ARE REQUIRED IN ENCLOSURES UP TO 96" HIGH. THEY ARE RECOMMEND-
ED FOR ALL ENCLOSURES.
ABOVE 84" COMBUSTIBLE FINISHING MATERIALS MAY BE USED ON THE FRONT FACE.
DO NOT INSULATE AROUND THE APPLIANCE.
6.0 FINISHING
6.1 FACEPLATE
AV ERTISSEMENT
:
AIR COMBURANT SEULEMENT
W ARNING:
COMBUSTION AIR ONL Y
W ARNING:
BLOWER
CONNECTION ONL
Y
AVERTISSEMENT
:
CONNEXION DE
LA
SOUFFLERIE
SEULEMENT
A. Remove the facing template held in place
with the 12 screws shown. Discard the
screws and template.
6.2 UPPER GRILL INSTALLATION
Logo
Placement
A. Mount the keystone and upper grill to
the faceplate as shown, using the 4 nuts
supplied.
Remove the backing and place logo onto the
bottom left corner of the faceplate.
Ensure that the pressure switch actuating
arm and air control rod, protrude through the
faceplate when installed.
Remember to record your serial # in the
manual for future quick reference.