Napoleon Fireplaces Vittoria - GD19 - Manuel (Page 40)

40
W415-1004 / B / 08.10.12
A. Remove the keystone to access the turn
button.
6
4
C. Open the bottom inset to
access the control panel.
8.4.2 CONTEMPORARY FACING KIT
(If appliance is equipped with either of these fronts, cement board is
required.)
REMOVAL:
A.
Lift the facing up and off the screws.
INSTALLATION:
B.
Lift the facing and slide the hooks over the top of the spacers
and then let it slide down into position.
THE COMPONENTS IN THIS KIT ARE HEAVY, USE CARE WHEN LIFTING AND ENSURE THEY ARE
FIRMLY SECURED ONCE INSTALLED.
THIS FRONT FACING DOES NOT REPLACE THE MAIN GLASS DOOR. DO NOT OPERATE WITHOUT
THE MAIN GLASS DOOR INSTALLED.
THE FRONT FACING CAN SIT FLUSH WITH A COUNTER, FLOOR, OR HEARTH.
!
WARNING
8.4 FACING KIT INSTALLATION/REMOVAL
5
5
B. Remove the front by turning the turn
button 1/4 turn. Pivot the top of the
facing away from the appliance, and
lift it up and away from the appliance.
8.4.1 FACING KIT