Thermador PB30 - Manuel (Page 4)

Thermador ® Professional ® Indoor Grill Care and Use Manual
ELECTRICAL REQUIREMENTS AND GROUNDING INSTRUCTIONS
CAUTION
In Case of an Electrical Failure
If for any reason a gas control knob is turned ON and there is no electric power to operate the
electronic igniters on the grill burners, turn OFF the gas control knob and wait 5 minutes for
the gas to dissipate before lighting the grill burner manually.
To light the grill burners manually, carefully hold a long-stem lighted match or a multi-purpose
long disposable lighter to the burner ports and turn the gas control knob to HI. During a power
failure, you can manually light the grill burners, but each burner must be lit with a long-stem
match or a multi-purpose long disposable lighter.
See Page 7 for additional information on manually lighting the burners.
PLEASE READ CAREFULLY
The Thermador PROFESSIONAL Indoor Grill re-
quires an electrical circuit rated at 120 volts, 60
Hz., 10 Amps.
For personal safety, this appliance must be
connected to a properly grounded and polarized
electrical power supply.
Always disconnect the electrical plug from the wall
receptacle before servicing this unit.
See Installation Instructions for electrical
requirements and grounding instructions.
It is the personal responsibility and obligation of
you, the user, to have this appliance connected to
the electrical power supply in accordance with the
National Electrical Code and/or applicable local
codes and ordinances by a qualified electrician.
It is recommended that a dedicated circuit servic-
ing this appliance be provided.
!
2
DO NOT UNDER ANY CIRCUMSTANCES
CUT OR REMOVE THE SEPARATE
GROUND WIRE OR THE THIRD (GROUND)
PRONG FROM THE POWER CORD PLUG.
Important Safety Instructions
!