Before calling for service – Thermador PB30 Manuel d'utilisation

Page 14

Advertising
background image

Thermador

®

Professional

®

Indoor Grill

Care and Use Manual

Before calling for service, check the following to avoid
unnecessary service charges.

Be sure to check these items first:

Is there a power outage in the area?

Is the household fuse blown or the circuit breaker
tripped?

Is the grill disconnected from the electrical supply?

IF THE BURNERS DO NOT IGNITE

Are the burner ports clogged?

Is a fuse blown or is the circuit breaker tripped?

Is the manual shut-off valve closed, preventing the flow
of gas?

Is the spark igniter sparking?

PRODUCT RATING PLATE

Indoor Grill:
The product rating plate shows the model and serial numbers
of your Indoor Grill. It is located on the underside of the Grill
chassis near the gas inlet connection and electric power cord.

SERVICE
INFORMATION

______________________________

Serial Number

______________________________

Date of Purchase

______________________________

Dealer’s Name

______________________________

Dealer’s Phone Number

______________________________

Service Center's Name

______________________________

Service Center's Phone Number

Also, enter this information on the
Product Registration Form in-
cluded with this product, then
mail it to the indicated address.

— Thank You.

Before Calling For Service

CUSTOMER SERVICE:

800/735-4328

or see our website:

www.thermador.com

12

Product Rating Label Location – Indoor Grill Model

3" Min.

36"
Power
Cord

3/4" flex line

3-Prong grounding type
receptacle connected to
a properly grounded and
polarized electrical
supply rated at 120VAC,
10 Amps, Single Phase,
60 HZ.

Product Rating

Label/Serial Tag

All Installer supplied parts must
conform to Local Codes.

A manual valve must be
installed external to the
appliance, in an accessible
location from the front, for the
purpose of shutting off the gas
supply.

Regulator (supplied
with unit) Install
horizontally,

Front - Bottom of Unit

Threading compounds must
be Resistant to Propane Gas

gas flow

1/2" or 3/4" NPT

Advertising