Philips Magnavox H2160MW9 - Manuel (Page 49)

47 EN 47 EN
Recording
Basic Setup
Connections
Playback
Editing
Introduction
Function Setup
Others
Español
How to select a channel number for the timer recording
Analog TV For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog CATV For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
125), the channel will be decided as soon as you enter the channel number.
Digital TV For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Digital CATV For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
135), the channel will be decided as soon as you enter the channel number.
minor channels For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.
[K / L] does not skip the non-existed minor channels.
TIMER RECORDING
Checking, canceling, or correcting the timer
programming information
If the timer program did not complete correctly,
the error number appears in the timer pro-
gramming list.
1) Press [TIMER].
2) Check the information.
Timer Programming
1/1
SP (1:00)
FEB/20/08 10:30 AM 125.1 SP
Date Start End CH
FEB/20 10:30AM 11:30AM DTV125. 1
New Program
TUE FEB/19 11:30AM
3-A) To delete the timer program:
1 Use [K / L] to select the program you want to
delete, then press [OK].
2 Use [K / L] to select “Delete”, then press [OK].
Confirmation window will appear.
3 Use [K / L] to select “Yes”, then press [OK].
3-B) To correct the timer program:
1 Use [K / L] to select the program you want to
correct, then press [OK].
2 Use [K / L] to select “Program Change”, then
press [OK].
3 Correct the timer program by using
[K / L / { / B], then press [OK].
4) Press [TIMER] to exit.
Timer Programming
1/1
SP (1:00)
FEB/20/08 10:30 AM 125.1 SP
Date Start End CH
E41 FEB/20 10:30AM 11:30AM DTV125. 1
New Program
WED FEB/20 1:00PM
Each error number means:
E1-22
E37-39 Recording error other
than below
E24 Unrecordable disc
E25-26 Copy prohibited
program
E29 Disc protected
E30 Disc full
E35 PCA full *1
E36 Already finalized
video format disc
E40 Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
E41 Power failed
E42 No disc when
recording
E43 Already 49 titles
recorded
E44 Already 254 chapters
recorded
E45 Copy prohibited
program
E46 It is impossible to
record additionally
on a disc recorded
by other units
when setting “
Make Recording
Compatible” to “OFF”.
E47 Already 600 titles
recorded on the HDD
E49 There was no disc
space on the HDD
at the starting time
for the HDD timer
recording.
E50 HDD recording is
canceled due to the
insufficiency of the
disc space on the
HDD.
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
• Timer program with an error number will be cleared
once the entry screen for the program is displayed.
*1 PCA is a disc's space reserved for recording test.
Press [STOP C] on the front panel of the unit to stop
the timer recording in progress or press and hold
[STOP C] on the remote control for 2 seconds.
To stop the timer recording in progress
Note
• Press [TIMER] to check the timer recording in progress.
• As to the timer recording in progress (which is shown
in red in the timer program list), you only can edit
the end time. The changes made during recording
will be recognized as only specific to that recording
in progress and it will not affect the daily or the
weekly recording setting.
E2M01UD_H2160MW9_EN.indd 47 E2M01UD_H2160MW9_EN.indd 47 2008/04/18 15:12:09 2008/04/18 15:12:09