Philips Magnavox H2160MW9 - Manuel (Page 46)

44 EN 44 EN
AUTOSTART RECORDING
1 When watching TV program through
this unit’s tuner, use [H], [E] or
[V.REPLAY] to locate your desired
point to start recording.
• The autostart recording information will
appear. Refer to page 22.
2:59:44 / 3:31:31
10:42AM
10:10AM
7:10AM
2 Press [REC] to start recording.
1/100 1/ 1 0:00:34 / 0:32:34
HDD SP 1h53m
HDD
From the selected point, the contents of the
autostart recording become a recording title in
the HDD while the unit continues to record the
current content of the channel.
3 Press [STOP C] twice to stop
recording.
The recording stops and new autostart recording
begins.
• If you press [STOP C] once, the image on the
TV screen goes back to current content of the
channel while the recording continues.
Every time you turn on this unit, this unit automatically
records the channel currently viewed and temporarily
stores the recorded content to the HDD (Autostart
recording). By using this function, you can pause or go
back the TV program you are currently watching, and you
can also start recording the whole TV program even at
the middle of the TV program. The temporary recording
can be made up to 6 hours of time range. If the recording
exceeds 6 hours, earliest recording will be overwritten.
Note
• In the autostart recording, when you display the DTV
program information, the information will be
recorded as the part of the picture.
• If there is not enough recordable space on HDD to
record from the selected point to current point, you
cannot record the content of autostart recording.
• When you record the content of the autostart
recording, the recording mode will be SP.
• When you are recording the contents of the autostart
recording, if you record the part that is copy-protected,
“Copy guard detected.” appears and you are not able to
watch the part.
The autostart recording will be stopped, cleared in
following cases:
- Turning off the power
- Start recording
- Editing titles or goes into editing menu
- Deleting titles (DVD only)
- Start dubbing
- Changing input channels
- Using any functions in “Disc Edit” or “HDD Menu”
- Selecting following menus:
“General Setting” ➔ “Display” ➔ “V-Chip” ➔ “Downloadable Rating”
“General Setting”
➔ “Channel” ➔ “Auto Channel Preset”
“General Setting”
➔ “Channel” ➔ “Manual Channel Preset”
• The autostart recording will automatically resume for
new recording
For how to playback the autostart recording, refer to
“Playing back the Autostart Recording” on page 74.
Recording the Contents of the Autostart Recording
OPEN/
CLOSE SOURCE
HDMI
.@/: ABC
GHI
PQRS TUV
SETUP REPEAT
DISPLAY
AUDIO
DISC MENU
RETURN
TITLE
WXYZ
CLEAR SPACE
JKL MNO
DEF
OK
DVD HDD D.DUBBING
V.REPLAY V.SKIP
RAPID PLAY
REC REC MODE TIMER
DTV/TV STANDBY-ON
CHANNEL
REC
DISPLAY
E2M01UD_H2160MW9_EN.indd 44 E2M01UD_H2160MW9_EN.indd 44 2008/04/16 10:14:46 2008/04/16 10:14:46