Connection to a tv with an hdmi™ compatible port, 19 en 19 en – Philips Magnavox H2160MW9 Manuel d'utilisation

Page 21

Advertising
background image

19

EN

19

EN

Recording

Playback

Editing

Introduction

Connections

Basic Setup

Function Setup

Others

Español

CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT

A simple 1-cable connection with a device having an
HDMI (high-definition multimedia interface) connector
allows digital transfer of both digital video signals and
multi-channel audio signals.

HDMI IN

HDMI OUT

TV

this unit

HDMI Mode and Actual Output Signals

Cables not included.

Please purchase the necessary cables at your local
store.

When connecting with an HDMI cable, the audio signal
will be output as the digital audio signal simultaneously,
so you do not need the analog audio connection
described on page 20.

Press [HDMI] to select the HDMI output mode. The
output mode changes as follows every time [HDMI] is
pressed.

Front Panel Display

Video Output Signal

480 Progressive

Press [HDMI]

720 Progressive

Press [HDMI]

1080 interlaced

Press [HDMI]

1080 Progressive

Press [HDMI]

• The HDMI mode that is not supported by display

device will be skipped.

*HDMI: High Definition Multimedia Interface

Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the
display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital
content protection system). HDCP is copy protection technology that comprises data encryption and authentication
of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device
(or AV amplifier) for more information.

Note

• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate

properly with this unit.

• When using an HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however,

this unit cannot be controlled by another device via the HDMI connector.

• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit

length) maybe limited by the device that is connected.

• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In

connections with device such as this unit, audio signals are not output from the HDMI output connector.

• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-

DVI converter cable, the signals are output in digital RGB.

• When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur.

Please check and set the HDMI setting again.

Audio recording format of the disc

Dolby Digital setting of this unit

Actual output

DVD-video

Dolby Digital

PCM

2channel PCM

Stream

Dolby Digital

LPCM

PCM

2channel PCM

Stream

For audio CD and MP3 files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.
If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select
“Stream” in “Dolby Digital” setting (Refer to page 103).

Actual Output Modes by Media

HDMI cable

E2M01UD_H2160MW9_EN.indd 19

E2M01UD_H2160MW9_EN.indd 19

2008/04/15 19:57:38

2008/04/15 19:57:38

Advertising