Philips Magnavox H2160MW9 - Manuel (Page 112)

110 EN 110 EN
SETUPS
1 Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
then press [OK].
2 Use [K / L] to select “HDMI”, then
press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
• You cannot select HDMI when an HDMI cable is
not connected and the items are shown in grey
color.
HDMI
3 Use [K / L] to select a desired item,
then press [OK].
Format
HDMI Audio
RGB Range 1
2
3
4 When you finish with the setting,
press [SETUP] to exit.
1
Format (Default : RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [K / L] to select a setting, then press [OK].
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
Format
RGB
YCbCr
Your setting will be activated.
2
HDMI Audio (Default : ON)
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUTPUT jack to your audio
system, etc.), you can set the HDMI audio output off.
Use [K / L] to select a setting, then press [OK].
• Set to “OFF” when the HDMI sound is not output.
HDMI Audio
ON
OFF
Your setting will be activated.
3
RGB Range (Default : Normal)
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [OK].
• Select “Enhanced“ if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
RGB Range
Normal
Enhanced
Your setting will be activated.
OPEN/
CLOSE SOURCE
HDMI
.@/: ABC
GHI
PQRS TUV
SETUP REPEAT
DISPLAY
AUDIO
DISC MENU
RETURN
TITLE
WXYZ
CLEAR SPACE
JKL MNO
DEF
OK
DVD HDD D.DUBBING
V.REPLAY V.SKIP
RAPID PLAY
REC REC MODE TIMER
DTV/TV STANDBY-ON
CHANNEL
OK
SETUP
E2M01UD_H2160MW9_EN.indd 110 E2M01UD_H2160MW9_EN.indd 110 2008/04/15 19:59:21 2008/04/15 19:59:21