Operating – weber Performer 22 Inch Performer® Deluxe Charcoal Grill Assembly Guide Manuel d'utilisation
Page 23
WWW.WEBER.COM
23
OPERATING
TIMER OPERATION
This water-resistant digital cook timer provides both countup and countdown features in
hours, minutes, and seconds.
To set the time to countdown:
•
Press the
Start / Stop
:
button to turn on the backlight.
•
Press the
HR
button
(1)
to set the number of hours. Hold the button down to fast
forward digits (maximum setting: 99 hours)
(4)
.
•
Press the
MIN
button
(2)
to set the number of minutes. Hold the button down to fast
forward digits (maximum setting: 59 minutes)
(5)
.
•
When the time is set, press the
Start / Stop
:
button
(3)
to start the
countdown.
•
When the time is up, the alarm will sound for 30 seconds and automatically restart
countdown from previous time setting.
IMPORTANT
When the timer has over an hour left on the countdown, H and M (Hours and Minutes) will
flash on and off; numbers will countdown every minute. When the timer has less than an
hour of time left, H and M turn to M and S (Minutes and Seconds) and the seconds countdown;
numbers will start to countdown every second.
To clear the time:
•
Press the
Start / Stop
:
button to turn on the backlight.
•
Press the
HR
and
MIN
:
buttons simultaneously
(1)(2)
.
To set the time to countup:
•
Press the
Start / Stop
:
button to turn on the backlight.
•
Press the
Start / Stop
:
button again to start countup. While counting up,
display will show the reading in hour/minute and minute/second formats.
•
Press the
Start / Stop
:
button twice to stop timer. The countup will stop after
99 hours
(4)
, 59 minutes
(5)
.
Automatic shut off:
•
To save battery life, the backlight turns off after 10 seconds. The timer will turn
completely off after 10 minutes of inactivity.
Note: If using the timer in an environment that subjects it to electrostatic discharge (static
electricity) the time setting may be lost. If this happens, reset the timer.
Battery installation:
•
Use a Phillips screwdriver to unlock the battery compartment on the back of the timer
(6)
by turning the screw clockwise.
•
Remove the battery cover from the back of the timer
(7)
.
•
Add or replace the AAA batteries
(8)
.
•
Replace the battery cover.
•
Lock the battery cover by turning the screw counterclockwise with a Phillips
screwdriver.
•
After the batteries are installed, (
00
00
) will display on the LCD screen.
Maintenance:
•
Do not clean the timer with an abrasive or corrosive compound. Doing so may scratch
it or corrode the electronic circuits.
•
Do not subject the timer to excessive force, shock, dust, or expose it to excessive
temperatures or humidity. Doing so may result in it malfunctioning, shorter electronic
life span, battery damage, or distorted parts.
•
Do not tamper with the internal components of the timer. Doing so will invalidate the
timer’s warranty and may cause unnecessary damage to the battery and internal
parts.
•
Do not subject the timer to excessive exposure to direct sunlight or heavy rain.
•
Do not immerse the timer in water.
For best performance, it is recommended to bring the timer indoors while not
in use.
4
5
1
2
3
7
6
8