Off-taste or odor in the ice, The ice maker is not producing ice, The ice maker is producing too little ice – Whirlpool EB22DKXFB00 Manuel d'utilisation

Page 42

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

The ice maker is not producing ice

Check if...

Then... -

The freezer temperature is not cold enough to

produce ice.

See the “Setting controls” section.

The ice maker arm is in the “OFF” (arm up)

position.

Lower arm to the “CN” (arm down) position. See the “Using

the optional automatic ice maker” section.

The water line shutoff valve to the refrigerator is

not turned on.

Turn on the water valve. See the “Installing the optional

ice maker” section.

An ice cube is jammed in the ejector arm.

Remove the ice from the ejector arm with a plastic utensil.
Refer to the “Ice maker operation”.

The ice maker mold has no water in it or no ice

has been produced.

Check to see if your refrigerator has been connected to
your home water supply and the supply shutoff valve is
turned on. Refer to the “Connecting refrigerator to water
source” section.

If not due to any of the above, there may be a problem with

the water line. Contact the Consumer Assistance Center.

The ice maker is producing too little ice

Check if...

Then ...

The ice maker has just been installed.

Wait 72 hours for full ice production to begin. Cnee your

refrigerator is cooled down, the ice maker should begin
producing 70-120 cubes every 24 hours.

A large amount of ice has just been removed.

Allow 24 hours for ice maker to produce more ice.

The controls are not set correctly.

Refer to the “Setting the controls” section.

The water shutoff valve is not turned completely on.

Turn valve on fully. Refer to the “Installing optional ice

maker” section.

There is a water filter installed on the refrigerator.
This filter may be clogged or installed incorrectly.

First, check the filter installation instructions to ensure

that the filter was installed correctly and is not clogged.

If installation or clogging is not a problem, call a qualified
person or a technician.

Off-taste or odor in the ice

Check if...

Then ...

The plumbing connections are new, causing

discolored or off-flavored ice.

Discard the first few batches of ice.

The ice cubes have been stored for too long.

Throw old ice away and make a new supply.

Food in the freezer has not been wrapped properly.

Refer to the “Storing frozen food” section.

Freezer and ice bin need to be cleaned.

See the “Cleaning your refrigerator” section.

Water contains minerals (such as sulfur).

A filter may need to be installed to remove the minerals.

42

Advertising