A caution, How to care for your iron after each use, Outside surface of iron – Panasonic NI-S650TR Manuel d'utilisation
Page 11: Soleplate, Specifications
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
HOW TO CARE FOR YOUR IRON
AFTER EACH USE
1. Set the Temperature Selector Dial to" OFF".
2. Turn the iron off and unplug.
3. Empty the iron immediately after using.
Do not store the iron with water in it.
4. Move the Steam/Dry Selector into the Dry position.
If the Steam/Dry Selector is not in the Dry position after using, remaining
water will move into the Soleplate and damage the Soleplate and may
result in burns during the next initial use of the iron.
5. Wait until the iron has cooled before storing it, and always set it on the
Heel Rest to protect the Soleplate from scratches, corrosion or stains.
6. After letting iron cool completely, push the Cord Wind Button to wind
the cord. Store the iron vertically in a safe place after winding cord
completely. (NI-S300TR/S650TR/S655TR Only)
Please see IMPORTANT SAFETY INSTRUCTIONS on page 2 items 4 and 5.
OUTSIDE SURFACE OF IRON
After unplugging and cooling the iron, simply wipe off with a damp cloth
and if necessary, use a mild detergent.
NEVER USE ANY HARSH CLEANERS.
Starch and other residue may be easily removed from the Soleplate with a damp cloth.
To avoid scratching the finish never use a metallic pad to clean the Soleplate, and never
place the iron on a rough surface.
If synthetics are ironed at too high a temperature, not only is the fabric usually ruined, but
the iron Soleplate is often covered with the melted remains of the synthetic fabric.
The best way to remove synthetic residue from the Soleplate is to heat the iron and to iron
over an old cotton rag.
Never use steam iron cleaners in the iron, since they may damage the working parts of
NI-S300TR NI-S650TR NI-S655TR
120 V ac 60 Hz
120 V ac 60 Hz
10 A, 1200W
10 A, 1200 W
2.6 lb (1.2 kg)
2,4 lb (1,1 kg)