S-video input connector (s-video in), Video input connector (video in a/b), Video output connector (video out a/b) – Panasonic WV-CM2080 Manuel d'utilisation
Page 5: Ac inlet socket (ac in), Installation, Mounting into the rack, Cautions
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
® S-Video Input Connector (S-VIDEO IN)
For input of S-video signal from an outboard device.
® Video Input Connector (VIDEO IN A/B)
For input of composite video signal from an outboard
device.
Video Output Connector (VIDEO OUT A/B)
The video input signal connected to the Video Input
Connector is looped through to this connector and ter
minated automatically.
AC Inlet Socket (AC IN)
Plug the power cord (supplied as a standard accesso
ry) into this socket and connect It to an AC outlet.
INSTALLATION
The installation described below should be made by qualified service personnel or system installers.
■ Mounting into the Rack
The monitor can be mounted into the rack as described below.
1.
Place the rack mounting brackets supplied onto the
rear of the monitor and tighten with the eight supplied
screws (M4 X 10).
Install the monitor with the rack mounting bracket in the
rack securing it with four screws (not included).
Cautions:
•
Do not block the ventilation opening or slots on the
cover to prevent the appliance from overheating.
Always keep the temperature in the rack within 45“C
{113T).
• If the rack is subject to vibration, secure the rear of the
unit to the rack using additional rack mounting brackets
(procured locally).