Panasonic WV-CM2080 - Manuel (Page 3)

PREFACE
The Panasonic WV-CM2080 Color Monitor’s high resolution
S-video input assures high definition picture quality.
All monitor functions, except for power and input selection,
can be controlled from an onscreen menu. Provided with
power saving feature as well as standard BNC and S-video
input connectors for connection to CCTV equipment.
FEATURES
Approx. 510 mm {20-inch) viewable area with a hori­
zontal resolution of 500 TV lines
Three selectable inputs, including two composite and
one S-video input
Two standby modes for power saving: lower display
brightness and blackout
• Maximum speaker output of 0.7 W
• The monitor can be controlled with the specified sys­
tem controller using PS Data (Panasonic Security Data)
mode.
• Supplied with rack mounting brackets for mounting in a
rack
PRECAUTIONS
Refer all work related to the installation of this prod­
uct to qualified service personnel or system
installers.
Do not block the ventilation opening or slots on the
cover.
To prevent the appliance from overheating, place it at
least 5 cm (2 inches) away from the wall.
Do not drop metallic parts through slots.
This could permanently damage the appliance. Turn
the power off immediately and contact qualified service
personnel for service.
Do not attempt to disassemble the appliance.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Contact
qualified service personnel for maintenance.
Do not expose the appliance to water or moisture,
nor try to operate it in wet areas.
Take immediate action if the appliance becomes wet.
Turn the power off and refer servicing to qualified ser­
vice personnel. Moisture may damage the appliance
and also cause electric shock.
Do not use strong or abrasive detergents when
cleaning the appliance body.
Use a dry cloth to clean the appliance when it is dirty.
When the dirt is hard to remove, use a mild detergent
and wipe gently.
Do not operate the appliance beyond its specified
temperature, humidity or power source ratings.
Use the appliance at temperatures within -10°C -
-t-50°C (14“F - 122“F) and a humidity below 90 %.
The input power source for this appliance is 120 V AC
60 Hz.
Handle the appliance with care.
Do not strike or shake it, as this may damage the appli­
ance.