The picture is noisy, No sound, The unit is warm – Sony CPJ-D500 Manuel d'utilisation
Page 29: The projected plane is dark
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
The picture is noisy
• Check the connection (p. 7 - 1 1 ) .
• Select the input signal (p. 14).
• Select the RGB mode when using with a PC (p. 14).
• Adjust the tracking (p. 19).
• Set the output mode to VGA/SVGA on the PC. Refer
to the PC's manual for details.
No sound
• Press VOL + (p. 15).
• Check the connection (p. 7 - 1 1 ) .
The unit is warm.
• This is normal and not a malfunction of the unit.
Constant bright points of light (red, blue, or green)
appear on the screen.
• This is a characteristic of the liquid crystal screen and
not a malfunction of the unit.
The projected plane is dark.
• Replace the bulb with a new one (p. 25).
Troubleshooting
29-El