Adjusting the picture of the rgb input – Sony CPJ-D500 Manuel d'utilisation
Page 17
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Adjusting the
picture of the RGB
input
CXyvST*NMV OuUl»
([ POWER
D
t
PC/VIDEol
f
1
i
I^NCTIO
n
I
___
ic3 ™'- col
FL»«:rwR£Set CawLMWN
Front stand
Control panel
Side stands
You can adjust the brightness, centering, tracking
and synchronization.
If necessary, you can also reset the adjustment to the
factory preset level.
The adjustment items change in the following order
as you press FUNCTION.
Adjustment items
BRIGHTNESS: Adjusts the picture brightness.
PICTURE MODE: Selects PC signal (p. 14).
V CENT: If the picture is off the center of the
projected plane in the vertical direction, adjust
the vertical centering.
H CENT: If .the picture is off the center of the
projected plane in the horizontal direction,
adjust the horizontal centering.
TRACKING: Eliminates the wide vertical bands on
the picture.
SYNC: Synchronizes the RGB signals. If the RGB
signals are not synchronized, the picture looks
unclear, or has red or blue shadows at the
edges.
Adjusting the picture of the RGB input f 7-EN