Tweco 20 O2 Auto-Cut - Manuel (Page 65)

Manual No. 0-4816 Auto-Cut 200
2
3-41 INSTALLATION
3.21 Install Coolant
1. Remove the cap from the coolant tank. Fill the coolant tank to the level shown, with Thermal Dynamics
coolant. The coolant level is visible through the translucent coolant tank. The amount of coolant required
varies with torch leads length.
Cat. Number and Mixture Mixture Protects To
7-3580 'Extra-Cool TM ' 25 / 75 10° F / -12° C
7-3581 'Ultra-Cool TM ' 50 / 50 27° F / -3° C
7-3582 'Extreme Cool T M ' Concentrate* -65° F / -51° C
Coolant Capabilities
* For mixing with D-I Cool TM 7-3583
RETURN SUPPLY
RETURN SUPPLY
Art # A-04803
COOLANT
Fill Range
Coolant Tank
2. After the complete system has been installed, check that the coolant has been pumped through the
system as follows (see NOTE):