Rockwell Automation 1762-IQ32T MicroLogix DC Input Module - Manuel (Page 17)

MicroLogix 1762-IQ32T DC Input Module 17
Publication 1762-IN019B-EN-P - June 2013
Specifications
General Specifications
Attribute Value
Number of inputs 32
Dimensions
HxWxD 90 x 40.4 x 87 mm
(3.54 x 1.59 x 3.43 in.)
Shipping weight, approx. 200 g (7.05 oz)
Bus current draw, max 170 mA @ 5V DC
0 mA @ 24V DC
Heat dissipation See Derating Charts on page 19
Wire size 22, 24, 26 AWG solid or stranded copper wire rated @ 90°C (194 °F)
Wiring category (1)
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publication
1770-4.1 .
2 - on signal ports
Pilot duty rating Not rated
Enclosure type rating IP20
North American temp code T3C
Input Specifications
Attribute Value
Isolated groups Group 1: Inputs 0...7
Group 2 : Inputs 8...15
Group 3 : Inputs 16...23
Group 4 : Inputs 24...31
Input group to backplane isolation Verified by one of the following dielectric tests:
1,200V AC for 2 s or 1,697V DC for 2 s
75V DC working voltage (IEC Class 2 reinforced insulation)
Vendor I.D. code 1
Product type code 7
Product code 99
Voltage category 24V DC sink/source
Operating voltage range 10...26.4V DC
10...30V DC See
Derating Charts on page 19
Signal delay, max Turn-on = 8.0 ms
Turn-off = 8.0 ms
On-state voltage, min 10 V DC