Rockwell Automation 1747-DPS1, 1747-DPS2 Port Splitter Installation Instructions - Manuel (Page 19)

Port Splitters 19
Publication 1747-IN516B-EN-P - October 2007
No standard cable is available for connecting to the PLC-5 controller. A 25-pin male
to 9-pin male adapter is required.
Cables Used to Connect to the 1747-DPS2 Network/Controller Ports
This port on the 1747-DPS2
port splitter Connects to With this cable
Network port (9-pin D-shell) or
Controller port (9-pin D-shell) Controller/interface with
RS-232/DF1 port (9-pin D-shell) 1747-CP3 (3 m, 10 ft)
1756-CP3 (3 m, 10 ft)
1761-CBL-AC00 (0.5 m, 1.5 ft)
Controller/interface with
RS-232/DF1 port (8-pin mini DIN) 1761-CBL-AP00 (0.5 m, 1.5 ft)
1761-CBL-PM02 (2 m, 6.5 ft)
1761-NET-AIC port 1
(9-pin D-shell) 1747-CP3 (3 m, 10 ft)
1761-CBL-AC00 (0.5 m, 1.5 ft)
1761-NET-AIC port 2
(8-pin mini DIN) 1761-CBL-AP00 (0.5 m, 1.5 ft)
1761-CBL-PM02 (2 m, 6.5 ft)