Rockwell Automation 1747-DPS1, 1747-DPS2 Port Splitter Installation Instructions - Manuel (Page 15)

Port Splitters 15
Publication 1747-IN516B-EN-P - October 2007
Mount the 1747-DPS2 Port Splitter to a DIN Rail
The 1747-DPS2 port splitter is installed by mounting to a DIN rail.
1. Determine your spacing requirements.
2. Mount the DIN rail to your mounting surface.
3. Pull the latch down and hook the top slot of the 1747-DPS2 splitter over the
DIN rail.
4. While pressing the port splitter against the rail, push the latch up to secure
the port splitter into place.
35 mm
101 mm
(3.98 in.)
(1.38 in.)
1747-DPS2
Splitter
DIN Rail
Latch