Rockwell Automation 1747-DPS1, 1747-DPS2 Port Splitter Installation Instructions - Manuel (Page 18)

18 Port Splitters
Publication 1747-IN516B-EN-P - October 2007
Cables Used to Connect to the 1747-DPS1 Network/Controller Ports
This port on the 1747-DPS1
port splitter Connects to With this cable
Network port (8-pin mini DIN) or
Controller port (8-pin mini DIN) Controller/interface with
RS-232/DF1 port (9-pin D-shell) 1761-CBL-AP00 (0.5 m, 1.5 ft)
1761-CBL-PM02 (2 m, 6.5 ft)
2711-CBL-PM05 (5 m, 16 ft)
2711-CBL-PM10 (10 m, 32 ft)
Controller/interface with
RS-232/DF1 port (8-pin mini DIN) 1761-CBL-AM00 (0.5 m, 1.5 ft)
1761-CBL-HM02 (2 m, 6.5 ft)
2711-CBL-HM05 (5 m, 16 ft)
2711-CBL-HM10 (10 m, 32 ft)
1761-NET-AIC port 1
(9-pin D-shell) 1761-CBL-AP00 (0.5 m, 1.5 ft)
1761-CBL-PM02 (2 m, 6.5 ft)
1761-NET-AIC port 2
(8-pin mini DIN) 1761-CBL-AM00 (0.5 m, 1.5 ft)
1761-CBL-HM02 (2 m, 6.5 ft)
IMPORTANT
Do not connect a MicroLogix 1100 controller to the 1747-DPS1 Port Splitter
Network port. Permanent damage to the MicroLogix 1100 communication port
may result.