Rockwell Automation 1747-DPS1, 1747-DPS2 Port Splitter Installation Instructions Manuel d'utilisation
Page 12
Advertising
12 Port Splitters
Publication 1747-IN516B-EN-P - October 2007
Install the 1747-DPS1 Port Splitter with a Mounting Plate
1. Determine your spacing requirements.
2. Drill holes into your mounting surface (#36 drill recommended).
3. Align the port splitter to the mounting plate and snap the port splitter into
place.
4. Fasten the mounting plate to your surface with four screws
(6-32 recommended).
50.6 mm
(1.99 in.)
39.3 mm
(1.55 in.)
86.9 mm
(3.42 in.)
96.8 mm
(3.81 in.)
Mounting Plate
Port Splitter
Mounting Plate
Advertising