Rockwell Automation 1792D-8BIO8E ArmorBlock MaXum 8 Input/8 Output Module Series B - Manuel (Page 9)

ArmorBlock MaXum 8 Input/8 Output Module Series B 9
Publication 1792D-IN033B-EN-P - September 2000
Troubleshoot with the Indicators
This module has the following indicators:
•
Network and Module status indicator
•
Logic status indicator
•
Individual point status indicators for inputs 0, through 15
The following table describes network and module status indicators.
Net/Mod Status Indicator
Indicator Status
Off No power or auto bauding
Flashing Green/Off On line but not connected
Solid Green On line, link OK, connected
Flashing Red Recoverable fault - module configuration error
I/O connection fault - one or more I/O connections in the timed-out
state
Solid Red Unrecoverable fault
Communication failure - duplicate node address present or incorrect
baud rate
Green to Red to Off At powerup only - LED test
I-2
O-2
I-3
O-3
I-5
O-5
I-1
O-1
I-6
O-6
I-4
O-4
Logic Status Net/Mod Status
I-0
O-0
I-7
O-7
41943
Point indicators for
inputs 0 and 1
Module Status
Indicators
Connector A
Connector B
Connector C
Connector D
Connector H
Connector G
Connector F
Connector E
Point indicators for
inputs 2 and 3
Point indicators for
inputs 4 and 5
Point indicators for
inputs 6 and 7
Point indicators for
inputs 8 and 9
Point indicators for
inputs 10 and 11
Point indicators for
inputs 12 and 13
Point indicators for
inputs 14 and 15
LED Assignments