Rockwell Automation 1792D-8BIO8E ArmorBlock MaXum 8 Input/8 Output Module Series B - Manuel (Page 6)

6 ArmorBlock MaXum 8 Input/8 Output Module Series B
Publication 1792D-IN033B-EN-P - September 2000
Input connectors for this module are shown below.
IMPORTANT
If the devices (sensors) connected to the input
connections require Class 2 power to operate, the
DeviceNet connections of this equipment must be
powered by a Class 2 source.
ATTENTION
!
•
Make sure all connectors and caps are
securely tightened to properly seal the
connections against leaks and maintain IP67
requirements.
•
For maximum noise immunity, input and
output cable return wires must be properly
terminated. When inputs and outputs are
connected in loopback, return wires should
be connected together.
•
I/O cable length should be less than 30
meters.
I-2
O-2
I-3
O-3
I-5
O-5
I-1
O-1
I-6
O-6
I-4
O-4
Logic Status Net/Mod Status
I-0
O-0
I-7
O-7
41943
Input 0
Output 0
Input 1
Output 1
Input 2
Output 2
Input 3
Output 3
Input 7
Output 7
Input 6
Output 6
Input 5
Output 5
Input 4
Output 4
Connector A
Connector B
Connector C
Connector D
Connector H
Connector G
Connector F
Connector E