Pioneer HTP-710 - Manuel (Page 86)

Additional information 10
86
En
HDMI
Symptom Remedy
No picture or sound. • If the problem still persists when connecting your HDMI component
directly to your monitor, please consult the component or monitor manual
or contact the manufacturer for support.
No picture. • Video signals that are input from the analog video terminal will not
output from the HDMI terminal. Signals that are input from the HDMI
terminal will not output from the analog video terminal. Be consistent with
the type of cable between input and output.
• Depending in the output settings of the source component, it may be
outputting a video format that can’t be displayed. Change the output
settings of the source, or connect using the composite jack.
• This system is HDCP-compatible. Check that the components you are
connecting are also HDCP-compatible. If they are not, please connect
them using the composite video jack.
• Depending on the connected source component, it’s possible that it will
not work with this system (even if it is HDCP-compatible). In this case,
connect using the composite video jack between source and system.
• If video images do not appear on your TV, try adjusting the resolution,
DeepColor or other setting for your component.
• To output signals in DeepColor, use an HDMI cable (High Speed HDMI
®
Cable) to connect this system to a component or TV with the DeepColor
feature.
OSD does not appear. • The OSD will not appear if you have connected using the HDMI output to
your TV. Use composite connections when setting up the system.
No sound, or sound
suddenly ceases. • If you’ve made separate connections for audio, make sure you have
assigned the analog/digital jack(s) to the corresponding HDMI input for the
component.
• Check the audio output settings of the source component.
• Check that the Audio Parameter setting is set to
HDMI AMP/THRU (refer
to page 70).
• If the component is a DVI device, use a separate connection for the audio.
• HDMI format digital audio transmissions require a longer time to be
recognized. Due to this, interruption in the audio may occur when
switching between audio formats or beginning playback.
• Turning on/off the device connected to this unit’s HDMI OUT terminal
during playback, or disconnecting/connecting the HDMI cable during
playback, may cause noise or interrupted audio.
HTP-710_VYXCN_En.book 86 ページ ２０１０年８月２３日 月曜日 午後６時４７分