Sony STR-LSA1 - Manuel (Page 7)

7 GB
Hooking Up the System
ANTENNA
AM
SPEAKERS
IMPEDANCE
USE 4-16 Ω
75 Ω
COAXIAL
FM
ANALOG IN
–
+
–
+
R L
R L U
i.LINK S200
E e E e
v v
Right speaker (R) Left speaker (L)
Speaker System Hookup
Required cables
Speaker cables (not supplied)
One for each speaker
(+) (+)
(–) (–)
Terminals for connecting the speakers
Connect the To the
Speakers (4 to 16 ohms) SPEAKERS terminals
Notes on speaker system hookup
• Twist the stripped ends of the speaker cables about 10
mm. Be sure to match the speaker cable to the
appropriate terminal on the components: + to + and –
to –. If the cables are reversed, the sound will be
distorted and will lack bass.
• If you use speakers with low maximum input rating,
adjust the volume carefully to avoid excessive output
on the speakers.
To avoid short-circuiting the speaker
cables
A short-circuiting in the speaker cables will mute the
speakers, and may even damage the receiver. To prevent
this, make sure to take the following precautions when
connecting the speakers.
Make sure the stripped ends of each speaker
cable do not touch another speaker terminal or
the stripped end of another speaker cable.
Examples of poor conditions of the speaker cable
Stripped speaker cable is touching another speaker
terminal.
Stripped cables are touching each other due to excessive
removal of insulation.