Sony KDL-32R420B - Manuel (Page 31)

31 US
D:\SONY TV\SY140048_Clover 29 (Rev-1)\4528762121_US\090ADD.fm masterpage: Right
KDL-48R470B / 40R470B / 32R420B
4-528-762-12(1)
US
 Keep the antenna cable away from other connecting
cords.
 To avoid TV interference, make sure to use an
undamaged antenna cable.
Tiny black points and/or bright points appear on
the screen
 The picture of a display unit is composed of pixels.
Tiny black points and/or bright points (pixels) on the
screen do not indicate a malfunction.
Picture contours are distorted
 Change the current setting of CineMotion to other
settings (page 19).
No color on programmes
 Select Reset (page 19).
No color or irregular color when viewing a signal
from the Y, P
B , P R jacks of /

 Check the connection of the Y, P B , P R jacks of /

and check if each jacks are firmly seated in their
respective jacks.
No picture from the connected equipment
appears on the screen
 Turn the connected equipment on.
 Check the cable connection.
 Press INPUT to display the connected equipment list,
then select the desired input.
 Correctly insert the memory card or other storage
device in the digital still camera.
 Use a digital still camera memory card or other
storage device that has been formatted according to
the instruction manual supplied with the digital still
camera.
 Operations are not guaranteed for all USB devices.
Also, operations differ depending on the features of
the USB device and the video being played.
Cannot select the connected equipment on the
menu or cannot switch the input
 Check the cable connection.
Sound
No sound, but good picture
 Press VOL +/- or MUTING.
 Check if Speakers in AV Setup is set to TV Speakers
(page 24).
 Check if the headphone plug is connected to the TV.
No sound or noisy sound
 Check if the TV system setting is appropriate
(page 19).
Channels
The desired channel cannot be selected
 Switch between digital and analogue mode and
select the desired digital/analog channel.
Some channels are blank
 The channel is for scrambled/subscription service
only. Subscribe to a pay TV service.
 Channel is used only for data (no picture or sound).
 Contact the broadcaster for transmission details.
Digital channels are not displayed
 Contact a local installer to find out if digital
transmissions are provided in your area.
 Upgrade to a higher gain aerial.
General
The TV turns off automatically (the TV enters
standby mode)
 Check if the Sleep Timer is activated (page 24).
 Check if the Duration is activated by On Timer
(page 24) or Photo Frame Settings (page 23).
 Check if the Idle TV Standby is activated (page 25).
Some input sources cannot be selected
 Select Manage Inputs and select Always of the input
source (page 24).
The remote control does not function
 Replace the batteries.
HDMI/MHL equipment does not appear on
BRAVIA Sync Device List
 Check that your equipment is compatible with
BRAVIA Sync Control.
Cannot select Off in BRAVIA Sync Control
 If you have connected any audio system that is
compatible with BRAVIA Sync Control, you cannot
select Off in this menu. To change the audio output
to the TV speaker, select TV Speakers in the
Speakers menu (page 24).
The Parental Lock password has been forgotten
 Press HOME and select Settings t Preferences t
Parental Lock t Password then enter 4357 for the
password.
Store Display Mode or Promoting Feature Logo
appears on the screen
 On the remote control, press RETURN then press
HOME and select Settings t Preferences t Setup
t Initial Setup. Be sure to select Home in Location.