GE ZBD9900RII - Manuel (Page 21)

21
Before You Call for Service
Dishwasher
Problems Possible cause Action
The dishes
are not
clean
• The spray arms are not rotating
• Old dishwasher detergent.
Note: Detergent is a perishable
• Incorrect dosage of detergent
• Insufficiently powerful dishwashing
program
• Incorrect program chosen
• Incorrect loading of the dishwasher
• Glasses and cups have tipped over during
the wash
• Lift off the arms and clean
• Avoid large packs
• Dispense according to the level of water
hardness
• Select the TEMP BOOST or switch to a more
powerful wash setting
• Change to a more powerful wash setting
• Do not cover china with large bowls or
similar
• Avoid placing very tall glasses in the corners
of baskets
• Load the china securely
Stains or a
film on the
china
• Dishwasher fitted with water softener is
leaking salt
• Incorrectly set rinse aid dispenser
• Phosphate-free detergent in combination
with hard water
• Too high a temperature and/or too
much detergent can cause etching on
(crystal) glass. Unfortunately this cannot be
remedied, only prevented!
• Check that the cover of the salt
compartment is properly screwed on.
Otherwise phone for Service
• See the chapter on rinse aid
• Change detergent
• Wash (crystal) glass at a low temperature
and dispense dishwasher detergent with
care. Contact the dishwasher detergent
manufacturer.
The china
has a
whitish-
blue sticky
film
• Too high dosage of rinse aid • Reduce dosage. See the chapter on rinse
aid. If the water is very soft, you could try
diluting the rinse aid (1 part rinse aid, 1 part
water).