Lighting features, Rinse agent, Water temperature – GE ZBD9900RII Manuel d'utilisation

Page 12: Using the dishwasher, Use a rinse agent

Advertising
background image

12

Using the Dishwasher

Dishwasher

Water

Temperature

This dishwasher can be plumbed to either a hot or

cold water line.
Hot water line connection: For effective cleaning

and to prevent dish damage, the entering water

supply should be at least 120°F (49°C) and not

more than 140°F (60°C). You can check the water

temperature with a candy or meat thermometer.

Turn on the hot water faucet nearest the

dishwasher, place the thermometer in a glass and

let the water run continuously into the glass until

the temperature ceases to rise.

Cold water line connection: The dishwasher’s

water heater will bring the water temperature to

the appropriate level for cleaning.
NOTE: Most cycle times will increase when
plumbed to a cold water line.

Use a

Rinse

Agent

A rinse agent improves dry performance,

reduces spots and prevents new film buildup

on your dishes, glasses, flatware, cookware

and plastic. Cascade Crystal Clear

®

is the

recommended rinse agent for Monogram

Dishwashers.
The rinse agent dispenser holds 4.7 oz. of rinse

agent. Under normal conditions, this will last

approximately one month. Try to keep it full,

but do not overfill.
To fill the rinse agent dispenser, make sure the

dishwasher door is fully open.

Rotate the dispenser cap counterclockwise and

lift it out. Add rinse agent until the indicator

window shows full.
Clean up any spilled rinse agent with a damp

cloth. Replace the dispenser cap.
The amount of rinse agent released into the final

wash can be adjusted. The factory setting is at

the midpoint. If there are rings of calcium (hard

water) spots on dishes, try a higher setting. If

there is foaming, use a lower setting.
To adjust the setting, remove the dispenser

cap; then turn the adjuster counterclockwise to

increase the amount of rinse agent or clockwise

to decrease the amount of rinse agent dispensed.

Lighting

Features

Interior Lights
The interior Halogen lights provide better visibility

for loading and unloading. They turn on when

the door is opened and turn off when the door is

latched.

Do not attempt to replace the bulbs. If light bulb

replacement is necessary, please contact the

GE Answer Center for service by calling

1.800.626.2000.

1. Compartment for main wash dishwash-

er detergent

2. Compartment for pre-wash detergent

3. Rinse aid cover

4. Detergent compartment cover

3 (Rinse agent adjuster

is located under the cap)

4

1

2

Advertising