GE ZBD9900RII - Manuel (Page 10)

10
AUTO WASH
The dishwasher detects how soiled the dishes are and adjusts water
consumption and temperature accordingly.
HEAVY WASH
The HEAVY WASH program should be used for heavily soiled dishes, e.g.
saucepans, pots and gratin dishes. If there is still space in the machine after
loading such items, you can add plates etc.
NORMAL
WASH
Used for washing normally soiled dishes such as plates, serving dishes, cups and
glasses, etc.
LIGHT WASH
If the dishes are not heavily soiled, you can select the Light Wash cycle. This
cycle is intended for glass and china which has just been used and therefore
does not need a more powerful cycle.
SPEED WASH Select SPEED WASH if the dishes are very lightly soiled. This program is used for
very lightly soiled glass and china, e.g. coffee cups.
RINSE ONLY
For rinsing partial loads that will be washed later. Do not use detergent with this
cycle.
1
Select a cycle by pressing the CYCLE button until the required option is selected.
Dishwasher
Control Panel
1 2 3 4 5 6
Control
Panel
7
TEMP BOOST
When selected, the cycle will run with a heating element on longer and may
increase cycle time to improve both wash and dry performance.
2
DELAY START
If you want the machine to start later, press the DELAY START option button. The
clock symbol on the button lights up. Then press the START/RESET button and
the machine will start the program 5 hours later. To cancel DELAY START, hold
down the START/RESET button for three seconds.
3
HEAT DRY
When selected, the temperature of the last rinse cycle is increased to improve
dry performance. This may increase cycle time.
4
LOW RINSE
AID
Displayed when the Rinse Adgent dispenser needs to be refilled.
5