GE ZBD9900RII - Manuel (Page 18)

18
Dishwasher
Settings
Reprogramming
Some of the machine’s functions can be reprogrammed. You can change the dishwasher’s programming
by using the keypad. The selection will be retained until the next time you reset this function.
Even if the machine is turned off at the main switch or loses power for any other reason, all selections reg-
istered before the interruption of power will be retained.
Child-safe button lock
You can prevent a child starting the machine by accident or changing the settings by programming the
machine with a button lock, which requires the Temperature and Drying buttons to be pressed simultane-
ously to start up the machine. The button lock will automatically be reactivated after three minutes.
1. Switch off the dishwasher with the main switch.
2. Hold in the TEMP BOOST and HEAT DRY buttons while pressing the main switch. The
Temperature, Drying and start symbols will flash. Release the Temperature and Drying
buttons.
3. Press the CYCLE button – when the Auto wash symbol is lit,
the button lock has been activated.
4. Then press the START/RESET button to store the setting.
or Reset:
1. Switch off the dishwasher with the main switc.
2. Hold in the TEMP BOOST and HEAT DRY buttons at the same time as pressing the main
switch
3. Press the CYCLE – when the Auto wash symbol goes out,
the button lock has been deactivated
4. Then press the START/RESET button to confirm the setting.