Getting to know your indicator, Installation, 1 introduction – Ohaus CD-11 Indicator Manual en Manuel d'utilisation

Page 7: 1 unpacking and checking, Installation 2.1 unpacking and checking, Getting to know your indicator 1.1 introduction, Cd-11 indicator

Advertising
background image

7

2. INSTALLATION

2.1 Unpacking and Checking

Open the package and remove the instrument and the accessories. Check the completeness of the delivery. The
following accessories are part of the standard equipment of your new Indicator.

• Remove packing material from the instrument.

• Check the instrument for transport damage. Immediately inform your Ohaus dealer if you have complaints or

parts are missing. Your Indicator package should contain:

• Indicator CD-11
• AC Adapter, 9 V dc output
• Warranty card
• Capacity label
• Screw driver
• Instruction Manual

• Store all parts of the packaging. This packaging guarantees the best possible protection for the transport of your

instrument.

1. GETTING TO KNOW YOUR INDICATOR

1.1 Introduction

Thank you for deciding to purchase a CD-11 Indicator from Ohaus. The Ohaus CD-11 Indicator is a rugged, reliable,
electronic weight indicator designed for easy operation. The CD-11 Indicator has been NTEP tested and complies
with Class III and IIIL requirements of NIST HB44 for 1:5000 performance in pounds, kilograms, or grams. The CD-
11 Indicator can drive up to four 350 ohm load cells and provides capacity selections up to 20,000 lb/kg with a
maximum resolution of 1:20,000.

The CD-11 operates from six Alkaline “C” batteries and can also be powered externally using the AC adapter sup-
plied. A six digit LCD display is 1.0 inches/2.5 centimeters in height provides easy visibility when working at dis-
tances from the indicator. Four switches mounted on the front panel enable simple set up procedures. A menu
lockout switch can be set to lock out various functions of the indicator to prevent settings from being changed. An
RS232 Interface is built in. Accessories are available which permit the Indicator to be table, wall, or tower mounted.

Behind your instrument stands OHAUS, a leading manufacturer of precision Indicators, Scales and Balances. An
Aftermarket Department with trained instrument technicians is dedicated to providing you with the fastest service
possible in the event your instrument requires servicing. OHAUS also has a Customer Service Department to
answer any inquiries regarding applications and accessories.

To ensure you make full use of the possibilities offered by your CD-11 Indicator, please read the manual completely
before installation and operation.

CD-11 Indicator

Advertising