Ohaus CD-11 Indicator Manual en - Manuel (Page 22)

22
4. OPERATION (Cont.)
4.6 Clear Tare Operation
To clear the tared weight stored in memory, proceed as
follows:
• With no load on the scale base, press and hold G/N/T
Tare button until tArE is displayed, then release
button.
Stable
4.5 Gross/Net/Tare Recall Operation
Gross Stable
When a container has been placed on the platform and
tared, it's weight is stored in memory. Adding material to
the container is shown as NET weight. The gross weight
is a combination of the tared weight and the material.
The G/N/T Tare button allows switching between
GROSS, NET and TARE weights.
• Repeately press (short presses) the G/N/T Tare
button to cycle through Gross, Tare and Net readings.
The sample illustrations indicate a tare weight of2kg
simulating a container, a net weight of 13kg which
would be the material in a container and a gross
weight of 15kg which is the total weight of the con-
tainer and material. Stable Tare
Stable Net
Gross Center
of zero
4.7 Unit Switch Operation
To switch measuring units, proceed as follows:
• Press and hold Print Units button until display
changes to selected measuring unit. If grams and kg
were enabled, you have a choice of g, lb or kg. the
display sample indicates 13kg load changed to lbs
shown as a net weight because a tared weight of 2kg
was used and stored in memory.
Stable Net
CD-11 Indicator