Yamaha DVD-C950 - Manuel (Page 19)

15
English
Disc Operation
IMPORTANT!
– If the inhibit icon (
or X) appears
on the TV screen when a button is
pressed, the function for that
button is not available on the
current disc or at the current time.
– Depending on the DVD or VIDEO
CD disc, some operations may
operate differently or be
restricted.
– Do not push on the disc tray or put
any objects other than discs on the
disc tray. Doing so may cause the
disc player to malfunction.
1 Press STANDBY/ON on the front panel.
2 Press OPEN/CLOSE / on the front
panel to open the disc loading tray.
3 Place the chosen discs in the tray, printed
side up.
4 Press PLAY B.
➜ The disc tray closes and playback starts
automatically for all of the loaded discs
in the tray in sequence.
5 To stop playback, press STOP 9.
• To playback a specific disc directly,
press DISC SKIP repeatedly on the
remote control or press DISC (1, 2, 3,
4, 5) on the front panel.
• Press PLAYXCHANGE on the front
panel to open the disc tray and reload
or unload discs without interrupting
current disc playback.
• Playback will stop after all discs have
been played.
• When the disc tray is open, pressing
PLAY B, OPEN/CLOSE /,
PLAYXCHANGE, DISC (1, 2, 3, 4,
5) will close the disc tray automatically.
Unless otherwise stated, all operations
described here are carried out using the
remote control for this player.
Pausing playback
1 During playback, press PAUSE ;.
➜ Playback will pause and the sound will
be muted.
2 Press PAUSE ; again to select the next
picture frame.
3 To resume normal playback, press
PLAY B.
Selecting a track/chapter
• Press S / T or use the numeric
keypad (0-9) to key in a track/chapter
number.
➜ During repeat playback of a track/
chapter, pressing S /T will replay
the same track/chapter.
Searching backward/forward
• Press and hold S / T, then press
PLAY B to resume normal playback.
➜ While searching, pressing S / T
again will increase the search speed.
Note:
– For MP3, WMA and DivX
®
, the search
function allows you to search the track
currently being played.
Stopping playback
• Press STOP 9.
Basic Playback
General Operation
TIP: The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the disc.
Disc Operation