Toshiba E1-17063A - Manuel (Page 84)

3-33
3
Resolution Setting
This sets the default resolution used for the Scan to E-mail mode.
1 Press the key and press .
2 Press to select “01.SCAN RESOLUTION”.
SCAN SETUP
01.SCAN RESOLUTION
02.MESSAGE SIZE LIMIT
3 Use the or key to select desired
resolution mode and press the key.
• The display returns to the SCAN SETUP menu.
SCAN RESOLUTION
1.200 x 100
2.200 x 200
3.200 x 400
4.400 x 400
SCAN SETUP
01.SCAN RESOLUTION
02.MESSAGE SIZE LIMIT
5. SCAN TO E-MAIL SETUP
This section describes how to set the default values of the settings for Scan to E-mail function.
The default resolution and message size limit may be set for Scan to E-mail. These settings are for
default values only, but may also be set or changed at the time that each E-mail document is sent.
Tip
Scan to E-mail can be used to send an Internet Fax to PCs which are located in your local area
network. When you want to scan a document and send the image data to your PC, use this
method. This method ignores the E-mail Properties settings of DSN and MDN so that this is useful
when you do not require the disposition or notification of E-mail transmission status.