Toshiba E1-17063A - Manuel (Page 54)

3-3
3
1. SETUP FLOW
The following table describes the Initial Setup Flow according to your conditions or needs.
To use the functions, the network configuration for this machine must be set up correctly. For the values
of the network configuration, contact your network administrator.
TCP/IP Configuration Setup
Setup the TCP/IP on the machine to connect to your local area network and the Internet.
P3-4 TCP/IP CONFIGUTATION
E-mail Account Setup
Setup the E-mail account information on your machine to enable the E-mail transmission.
P3-10 E-MAIL ACCOUNT SETUP
E-mail Properties Setup
You can also configure the E-mail properties. After the machine is set up, it is recommended to
configure the E-mail properties to use Internet Fax features.
P3-21 E-MAIL PROPERTIES SETUP
Scan to E-mail Setup
You can configure the default value of the E-mail properties that are used for the Scan to E-mail
transmission.
P3-33 SCAN TO E-MAIL SETUP
Onramp Gateway Setup
In order to use the Onramp Gateway Transmission, the relay mailbox that E-mail addresses are assigned
for the end stations should be created.
P3-35 ONRAMP GATEWAY SETUP
Offramp Gateway Setup
In order to use the Offramp Gateway Transmission, the device must be set up accordingly.
P3-40 OFFRAMP GATEWAY SETUP
Additional Functions Setup
The setup functions for the Network utilities (FTP) are available when the Internet Fax Kit is installed,
though they are not used for Internet Fax setup.
P3-46 ADDITIONAL FUNCTIONS SETUP